{"product_id":"bluelab-replacement-ph-probe-high-fidelity-sealed-gel-filled-analytical-electrode-with-bnc-connection-interface-for-guardian-monitors-and-combo-meters","title":"Bluelab - Replacement pH Probe – High-Fidelity Sealed Gel-Filled Analytical Electrode with BNC Connection Interface for Guardian Monitors and Combo Meters","description":"\u003csection\u003e\n\u003ch3\u003eBluelab - Replacement pH Probe – High-Fidelity Sealed Gel-Filled Analytical Electrode with BNC Connection Interface for Guardian Monitors and Combo Meters\u003c\/h3\u003e\n\u003cp\u003eRestore pinpoint acid-base tracking, eliminate sluggish calibration cycles, and lock in optimal nutrient availability with the Bluelab Replacement pH Probe. Explicitly engineered to survive the high-humidity, chemical-heavy conditions of commercial indoor vertical farms and advanced greenhouse facilities, this professional-grade replacement electrode is the vital diagnostic component that keeps your master analysis gear running at factory-level accuracy. Unlike conductivity sensors, which feature solid metal pins, pH electrodes utilize a delicate, ultra-thin glass sensing bulb filled with a specialized reference gel. Over months of constant contact with concentrated liquid fertilizers, organic additives, and fluctuating water temperatures, this reference gel naturally depletes, and the glass face accumulates microscopic mineral films. This unavoidable material wear slows down sensor response times, causes your calibration settings to drift, and can result in inaccurate readings that lead to major pH crashes or sudden nutrient lockout. This premium replacement probe completely resolves those issues. Featuring a **100% fully waterproof casing certified down to 10 meters (32.8 feet)**, this heavy-duty electrode comes pre-filled with a **low-maintenance, non-refillable reference gel**, keeping it sealed and protected against premature failure. Outfitted with a standard, high-shielding **BNC connection plug**, this industrial-spec probe snaps directly into your existing Bluelab Combo Meter or wall-mounted Guardian Monitor workspace, restoring instantaneous, zero-latency data tracking so your team can make chemical adjustments with absolute confidence.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e Replacing worn, slow-responding, or drifted pH electrodes on Bluelab Combo Meters and wall-mounted Guardian Monitors, restoring crisp 4.01 and 7.01 calibration curves, and maintaining continuous immersion tracking in deep mixing tanks.\u003c\/p\u003e\n\u003ch3\u003eKey Features \u0026amp; Technical Advancements\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal BNC Connection Interface:\u003c\/strong\u003e Designed with a standard, locking coaxial BNC plug that twists securely onto your Bluelab Combo Meter or Guardian Monitor, providing heavy shielding against electromagnetic field interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Meter Submersible Waterproof Build:\u003c\/strong\u003e Constructed with a rugged, hermetically sealed polymer shell that can be fully submerged down to 10 meters, making it ideal for deep reservoir tanks or drainage pits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance-Free Gel-Filled Core:\u003c\/strong\u003e Pre-filled with a high-purity, non-refillable reference gel that maintains a stable electrical potential over its entire operational life without requiring messy liquid refills.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast-Responding High-Sensitivity Bulb:\u003c\/strong\u003e Outfitted with a specialized glass sensing bulb that reads microscopic hydrogen-ion changes instantly, providing rapid data capture for automated mixing systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable, Impact-Resistant Shroud Design:\u003c\/strong\u003e Features built-in structural polymer guard slots around the glass tip, shielding the delicate sensing bulb from physical impact if dropped against tank walls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores Smooth Calibration Logic:\u003c\/strong\u003e Replacing a sluggish, aging probe eliminates calibration time-outs and errors, allowing your system to lock onto standard reference buffers quickly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Technical Specifications Matrix\u003c\/h3\u003e\n\u003ctable style=\"border-collapse: collapse; width: 100%; text-align: left;\" cellpadding=\"5\" border=\"1\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background-color: #f2f2f2;\"\u003e\n\u003cth\u003eAnalytical, Mechanical, \u0026amp; Connection Parameters\u003c\/th\u003e\n\u003cth\u003eEngineering Metric \/ Design Detail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand \u0026amp; Equipment Line\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBluelab New Zealand \/ Commercial Replacement Components Group\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrimary Hardware Focus\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDirect Replacement pH Electrode for Handheld Consoles and Wall Monitors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHardware Compatibility Fit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBluelab Combo Meter | Bluelab Guardian Monitor (All Generations)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSignal Connector Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard Coaxial BNC Plug with Quarter-Turn Twist-Locking Collar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMeasurement Range Capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.0 to 14.0 pH (Precision Resolved to 0.1 pH Units on Master Console)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSubmersion Depth Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100% Fully Waterproof up to 10 Metres Maximum Depth (32.8 Feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInternal Reference Electrolyte\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-Memory, Saturated Potassium Chloride (KCl) Gel (Non-Refillable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temperature Tolerance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0°C to 50°C (32°F to 122°F) Environment \/ Fluid Compatibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFactory Startup Packaging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIncludes Wet-Storage Cap Pre-Filled with Specialized KCl Hydration Solution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer Warranty Window\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6-Month Factory Replacement Guarantee from Date of Purchase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eAdvanced Sensor Maintenance \u0026amp; Substrate Control Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExecuting a Flawless Probe Priming and Calibration Sequence:\u003c\/strong\u003e When unboxing your new replacement probe, slide off the plastic storage cap and check the glass bulb—never touch the glass with your fingers, as skin oils can permanently coat the surface and disrupt readings. Rinse the probe tip thoroughly with clean tap water, then submerge it in a cup of fresh 7.01 pH calibration buffer solution. Allow it to sit for two minutes to let the temperature adjust, then press the calibration button on your Guardian or Combo Meter until the display locks in. Rinse the probe again and repeat the process in a 4.01 pH buffer solution to complete the two-point calibration before plunging it into your main nutrient reservoir.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoot-Zone Hydration and Substrate Coordination:\u003c\/strong\u003e Keeping a fresh, highly responsive pH probe on your equipment rack ensures your automated systems track water chemistry accurately, protecting your root zones from severe acid-induced burn. For optimal root health, accelerated nutrient absorption, and uncompromised drainage, route your perfectly tracked fertilizer recipes into a high-porosity 70\/30 blend of \u003cstrong\u003eCoco Coir and Horticultural Perlite\u003c\/strong\u003e. To ensure completely uniform irrigation delivery across your entire layout, pressurize your feed lines using a heavy-duty \u003cstrong\u003ePlont PPH Submersible Pump\u003c\/strong\u003e managed by an automated digital shot-timer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe Golden Rule of Wet Storage: Preventing Hydration Loss:\u003c\/strong\u003e The absolute fastest way to ruin a brand-new pH probe is to let the glass sensing tip dry out or to store it in the wrong fluid. Storing a pH probe in pure reverse osmosis (RO), distilled, or demineralized water draws out the essential salt ions from the internal reference gel, permanently destroying its electrical calibration. When your meter is not in use, always store the probe tip inside its protective plastic cap filled with official Bluelab pH Probe KCl Storage Solution, or keep it submerged continuously in an active mixing tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDe-scaling and Troubleshooting Sluggish Data Readouts:\u003c\/strong\u003e If you notice your monitor's pH readings take several minutes to stabilize or are steadily drifting, the glass bulb is likely covered in an invisible layer of mineral scale or organic biofilm. To resolve this, unmount the probe once a week and clean it gently using an official Bluelab Cleaning Kit. Use a soft-bristled brush dipped in specialized cleaner to break down stubborn calcium deposits on the glass face, then rinse thoroughly. Regular maintenance eliminates reading drift, ensuring your continuous monitoring equipment updates smoothly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For (Uses)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoutine Annual Facility Overhauls:\u003c\/strong\u003e The definitive replacement component choice for commercial greenhouse operators looking to refresh old, worn, or sluggish sensors before starting a new crop cycle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombo Meter Instrumentation Refreshing:\u003c\/strong\u003e Perfect for field technicians who need to restore original, lab-grade performance to a trusted handheld Combo Meter after months of rigorous troubleshooting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuardian Monitor Diagnostics:\u003c\/strong\u003e An exceptional maintenance component for wall-mounted continuous monitoring dashboards that demand a highly durable, fully submersible probe built to handle constant immersion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"Holland Forge","offers":[{"title":"Default Title","offer_id":48462514126948,"sku":"7418","price":176.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/6487\/0244\/files\/PHProbe.png?v=1779701399","url":"https:\/\/www.greenhousepolytunnels.com.au\/products\/bluelab-replacement-ph-probe-high-fidelity-sealed-gel-filled-analytical-electrode-with-bnc-connection-interface-for-guardian-monitors-and-combo-meters","provider":"Greenhouse \u0026 Polytunnels","version":"1.0","type":"link"}