Adloheat - Plant Heat Cable with Thermostat - Professional Bench & Bed Heating System

Adloheat Plant Heat Cable with Thermostat - Professional Bench & Bed Heating System

The Adloheat Plant Heat Cable System is an industrial-grade thermal solution engineered for high-success propagation, seed raising, and vigorous root development. Proudly Australian-made, this system is designed for both commercial nurseries and dedicated hobbyists who require precise control over root zone temperatures. The system features a high-durability twin-conductor heating cable with an earth screen, wound around a Kevlar core and double-insulated for maximum safety. When buried in a moist sand bed, the cable provides consistent bottom heat, creating a stabilized microclimate up to 45cm above the surface. This "plug-and-play" system comes factory-fitted with your choice of a manual dial or an upgraded digital thermostat, both housed in water-resistant enclosures for safe greenhouse operation. By maintaining optimal soil temperatures even on the coldest nights, the Adloheat Heat Cable ensures strong, uniform growth and significantly higher germination rates across all plant varieties.

Best For: Large-scale seed germination beds, professional cutting propagation, maintaining bottom heat in greenhouse sand benches, and establishing stable microclimates for exotic or tropical species.

Key Features

• High-Output Watt Density: Delivers approximately 170 watts per m², providing enough thermal power to maintain desired temperatures even in unheated greenhouses during peak winter.
• Advanced Safety Engineering: Features a twin-conductor cable with an earth screen and double insulation, rated IPX7 for safe use in the damp, high-moisture environments essential for propagation.
• Customizable Control Options: Available with a standard 0–50°C Dial Thermostat for intuitive manual control, or a Digital Upgrade pre-set to 23°C for high-precision electronic regulation.
• Ready-to-Install Design: Factory-fitted and hardwired for immediate use with no electrician or specialist knowledge required—simply roll out, cover with sand, and plug in.
• Robust Kevlar-Core Construction: Built for longevity and heavy-duty use, the cable is designed to be buried in sand or laid on insulated ground without degrading over time.

Specifications

• Brand: Adloheat (100% Australian Made)
• Voltage: 240V AC (Standard Plug)
• Wattage: ~170 Watts per m²
• IP Rating: X7 (Waterproof Cable)
• Cable Build: Multi-stranded heating wire, Kevlar core, Double insulation, Earth screen
• Lead Lengths: 2m (Socket to Thermostat) | 2m (Thermostat to Cable)
• Standard Sizes: 1m x 1m up to 12m x 1m 

Ideal For (Uses)

• Commercial Propagating Beds: Creating large-scale, thermostatically controlled sand beds for mass-production of seedlings and nursery stock.
• High-Success Cuttings: Providing the precise bottom heat required to stimulate rapid callous formation and root initiation in hardwood and softwood cuttings.
• Exotic Seed Raising: Maintaining the strict 16–23°C soil temperature range necessary for sensitive tropicals, orchids, and out-of-season vegetables.
• Ground-Level Warming: Installing over 50mm polystyrene insulation for flexible, temporary heating zones on greenhouse floors.

Installation Highlights

• Sand Bed Method: For best results, place cable between two 40–50mm layers of coarse, damp propagating sand.
• Spacing: If using unmounted cable, maintain ~100mm spacing for even heat distribution.
• Probe Placement: Position the thermostat sensor horizontally across the cable runs, just below the sand surface, for accurate regulation.