Headwind HVC Smart EC Fan Controller Pro v2 – Commercial-Grade Dual-Channel Temperature & Humidity Calibration Module with 3.6-Inch TFT Display and Steel Housing
Establish a highly controlled, biosecure nursery foundation and optimize your early-stage vegetative success rates across your entire facility with the commercial-grade Headwind HVC Smart EC Fan Controller Pro v2. Explicitly engineered to meet the rigid environmental tolerances, clean-room standards, and tight space constraints of large-scale commercial wholesale nurseries, indoor vertical farms, and advanced cultivation facilities, this advanced environmental processing brain delivers exceptional climate performance. Transitioning vulnerable unrooted cuttings, tissue culture plantlets, or fragile specimens into robust vegetative specimens requires a specialized mechanical ventilation architecture that locks in stable pressure drops and automated climate control while facilitating gentle, stagnant-free air exchange. Standard baseline environmental thermostats or generic speed dials frequently cause signal lag, lack dual-zone fan coordination, or fail under continuous high-humidity workloads. Our advanced, micro-processed climate automation solutions completely eliminate those operational vulnerabilities.
The core architecture of this technical controller relies on an uncompromised dual-fan channel matrix housed inside an industrial-weight AB5+ steel protective casing, ensuring exceptional durability and shielding against electromagnetic interference. Featuring a vibrant, ultra-clear 3.6-inch TFT digital display, it provides facility technicians with real-time ambient temperature and humidity data at a glance, facilitating instantaneous adjustments. The system features 5 distinct operational modes—Manual, Stop, Countdown (Timer), Trigger (Auto), and Alarm Setting—allowing operators to easily optimize volumetric airflow requirements and shift seamlessly from high-volume canopy scrubbing to delicate, low-velocity nursery venting. Equipped with a heavy-duty 5-meter precision sensor probe, a protective sensor hood to prevent water-droplet reading distortion, and all necessary structural mounting hardware, this multi-tier module provides an impenetrable defense against operational heat pockets and stagnant, moisture-laden micro-climates.
Best For: Automated dual-fan facility balance, precision Vapor Pressure Deficit (VPD) regulation, vertical rack intake/exhaust synchronization, and industrial-grade climate automation.
Key Features & Technical Advancements
- Dual-Fan Independent Channel Support: Enables direct connection and decoupled, independent algorithmic calibration of two separate EC fan units (e.g., matching intake and exhaust curves).
- Robust AB5+ Structural Steel Housing: Industrial-grade metal enclosure shields sensitive internal microprocessors from impact, dust, and localized radio frequency interference (RFI).
- 3.6-Inch High-Definition TFT Display: Crisp digital control screen delivers immediate visual reporting of active metrics, setpoints, and system statuses across wide viewing angles.
- 5 Versatile Intelligent Operating Modes: Shifting dynamically between Manual (10 adjustable speed increments), Stop, Countdown Timer, Automated Trigger, and dedicated Safety Alarm modes.
- Extended Environmental Reading Window: High-precision thermal array monitors temperatures from 0°C up to 65°C and relative humidity levels flawlessly from 0% to 99%.
- Energy-Saving Screen Dimming Protocol: Allows the display backlighting to cycle down to reduce ambient light pollution during critical dark photoperiods while the climate processor runs uninterrupted in the background.
Product Technical Specifications Matrix
| Model Identifier | Chassis Material & Screen | Sensor Reach & Shielding | Thermal & Humidity Metrics | Integrated Operational Routines |
|---|---|---|---|---|
| Smart EC Fan Controller Pro v2 | AB5+ Steel Body / 3.6" TFT Display | 5-Metre Cable with Protective Sensor Hood | 0°C - 65°C / 0% - 99% RH Range | Manual, Stop, Countdown, Trigger, and Alarm Modes |
Advanced Environmental Conditioning & Ventilation Management Tips
- Optimizing Vapor Pressure Deficit (VPD) with Automated Trigger Logic: Program the controller's Trigger mode to govern your active intake and exhaust loops. By establishing precise temperature and humidity targets, the v2 automatically ramps EC motor speeds up or down, preventing rapid humidity drops and maintaining a stable 85% to 95% relative humidity envelope for unrooted tissue cultures or a consistent target VPD for advancing vegetative blocks.
- Configuring Dual-Channel Pressure Balances for Stagnant-Free Scraping: Utilize the dual-fan channels to establish a perfect negative pressure pocket within your production bay. Program the exhaust fan on Channel 1 to run slightly faster than the intake fan on Channel 2; this prevents unfiltered, moisture-heavy air pockets from escaping active cultivation zones or gathering around dense lower-tier plant canopies.
- Utilizing Sensor Hoods to Prevent Micro-Frictional Reading Anomalies: Position the 5-meter sensor probe directly at canopy level, ensuring the specialized sensor hood is securely attached overhead. The hood shields the sensitive electronic elements from direct overhead water-misting spray and high-intensity lamp radiation, eliminating false spikes and maintaining continuous, uncompromised environmental control.
- Nursery Sanitation and Multi-Batch Electrical Maintenance: Keep the robust AB5+ steel enclosure clear of heavy, direct water washdowns by utilizing the included mounting hardware to anchor it outside high-mist zones. Between crop cycles, wipe down the screen and sensor tip with a soft microfiber cloth lightly dampened with an isopropyl solution to clear off residual bio-films, ensuring pristine automation lines for your next operational run.
Ideal For (Uses)
- High-Volume Commercial Nurseries: An outstanding nerve center for driving automated intake and exhaust cycles simultaneously, ensuring consistent air exchanges without disrupting sensitive plant micro-climates.
- Vertical Indoor Micro-Farms: Perfect for space-restricted facilities running tiered racking setups, giving cultivation teams centralized control over multiple extraction zones from a single dashboard.
- Dedicated Phenotype and Strain Hunting Lines: A reliable, ultra-precise monitoring and trigger accessory ideal for automating air exchange volumes inside isolated breeding spaces, diagnostic tents, or sensitive genetic trial rooms.
Oversized Item Delivery Options
Since oversized items require special handling, we may need to provide a custom freight quote for your order and will contact you with an updated shipping rate.
Available options include:
✔ Delivery to your closest depot for pickup - default method
✔ Direct delivery - requires forklift on site
✔ Direct delivery with tailgate lift truck (extra fees apply)
✔ Forklift loading at our warehouse (no extra charge if you arrange your own freight)
✔ Direct truck delivery (available in Victoria)
Important Notes:
- Shipping costs vary by location and method
- Because of the forklift requirement, delivery to the nearest depot is the default option and will be the method used unless you contact us to request otherwise.
Business Delivery:
- Business delivery is available for commercial customers only
- If you select business delivery and your products are bulky, it is your responsibility to ensure you have appropriate equipment (including forklifts) to unload products from the delivery truck
- If you select business delivery and you are not a business, you risk your product not being delivered and may incur additional fees to retrieve your order
- Business delivery customers must provide a valid business address and contact information
- Additional fees may apply for failed delivery attempts due to lack of appropriate unloading equipment
Let us know your preference, and we'll arrange the best solution for you!
Important Note on Availability & Shipping
Our warehouse serves as our office and logistics centre rather than a retail showroom. Because we ship from multiple locations and manage high-turnover stock, not all items are available for immediate pickup.
Lead Times:
- In-Stock Items: Usually ready for dispatch the same day.
- Supplier-Dependent Items: Usually take 2–8 weeks to arrive, depending on supplier availability. Products from Adloheat may take 8–12 weeks to manufacture—they are made to order in Australia by a small business, and longer lead times reflect the care put into quality.
While we strive for fast delivery, some timelines are subject to supplier availability and are beyond our control. We appreciate your patience as we source the best quality gear for your project.
Biosecurity & Interstate Shipping Restrictions
Due to strict state biosecurity regulations, we are unable to ship some products to certain states and territories:
- Potting Mixes cannot be shipped to Western Australia (WA), the Northern Territory (NT), or Tasmania (TAS).
- Seeds cannot be shipped to Western Australia (WA).
Orders placed for these items to restricted states will be cancelled and refunded. It is the customer's responsibility to ensure that the items being ordered can lawfully be delivered to their state or territory.
We Offer the Best Prices
We are committed to offering our customers the best prices possible. If you find the exact same product advertised at a lower price elsewhere, we invite you to contact us and we will review your price match request.
Price Match Conditions:
- The competitor must be an Australian-based seller with a physical presence in Australia
- The product must be the exact same item with a matching SKU or model number
- The product must be in stock and available for purchase at the competitor
- The lower price must be publicly advertised and currently available (not a clearance, closeout, or discontinued item)
- Price matching excludes marketplace platforms including but not limited to Temu and Aliexpress
- Price matching requests must be made before purchase
How to Request a Price Match:
To request a price match, please contact us at sales@greenhousepolytunnels.com.au with a link to the competitor's product listing, or call us on 0418 438 774. Please include the product details and the advertised lower price. We will review your request and respond within 2 business days.
Shop
- Choosing a selection results in a full page refresh.