IntroGro - 42 Watt Linkable LED Bar Series – Extended 95cm High-Performance GROW (6500K) & BLOOM (2400K) Commercial Luminaires
Please note the above shipping is an estimation only. Actual shipping cost can be calculated on the checkout page.
Important shipping notice: This product is not stocked at our Thomastown, VIC warehouse and is dispatched from another local warehouse. Please allow approximately 1-2 weeks for it to reach us before it is ready for pickup or dispatch.
IntroGro - 42 Watt Linkable LED Bar Series – Extended 95cm High-Performance GROW (6500K) & BLOOM (2400K) Commercial Luminaires
Scale up your commercial production footprint and drive explosive vertical growth with the extended IntroGro 42 Watt Linkable LED Bar Series. Measuring a generous 95cm in length, these heavy-duty, all-in-one solid-state fixtures are custom-engineered to provide uniform, end-to-end photon coverage across wide seedling benches, multi-tier nursery racks, and commercial rolling tables. This advanced series eliminates the high maintenance, fast degradation, and localized hot spots of legacy T5 fluorescent tubes. It features two specialized, phase-targeted spectrums: the LED Grow Bar, which emits a crisp 6500K daylight spectrum to build stocky stems and tight node spacing, and the LED Bloom Bar, which outputs a warm 2400K red-shifted spectrum with an ultra-high 96 CRI value to stimulate heavy essential oil production and thick floral stacking. Built with an industrial modular pass-through power network, these 42W bars are fully linkable. Cultivation crews can use the heavy-duty snap-in mounting clips and steel hanging hooks to quickly customize any growing zone, daisy-chaining multiple fixtures end-to-end up to a massive 500 Watts of continuous lighting load per single electrical circuit. Completely weather-hardened with an IP44 water-resistant rating and a 50,000-hour operational lifespan, each 42W bar arrives ready for immediate plug-and-play installation with an included 2-metre power lead.
Best For: Wide multi-tier commercial propagation racks, full-length vegetative benches, high-density cloning trays, and supplemental middle-canopy lateral lighting grids.
Key Features & Technical Advancements
- Phase-Targeted Spectrum Precision: Tailor your lighting environment by choosing between the high-blue 6500K Grow Bar to suppress stem stretching, or the high-red 2400K Bloom Bar to trigger heavy lateral budding and flower development.
- Ultra-High 96 CRI Bloom Spectrum: The Bloom Bar delivers an incredibly rich, true-to-life light profile, enabling cultivation teams to instantly spot subtle leaf discolorations, nutrient trends, or microscopic pests deep in the canopy.
- Extended 95cm Continuous Footprint: The extra-long 95cm chassis ensures an incredibly even light spread across standard-sized industrial racks, eliminating dark corners and keeping your vertical growth completely uniform.
- 500W High-Capacity Linkable Sockets: Outfitted with built-in male-and-female pass-through power plugs, allowing you to link multiple 42W bars together on a single run to minimize messy facility drop-cords.
- Efficient 0.19A Commercial Amperage Draw: Pulling a low 0.19 Amps of current per bar, this high-efficiency system allows you to build out dense, multi-tier vertical shelves without overloading your master electrical panel.
- IP44 Moisture & Splash Protection: Housed in a sealed, splash-resistant structural casing that thoroughly protects internal solid-state components from active foliar sprays, rising humidity, and overhead nursery mist.
- Complete Fast-Rigging Hardware Kit: Arrives as a true out-of-the-box solution, complete with custom-fit steel hanging hooks, snap-in surface mounting clips, and a thick 2-metre power cord with a molded wall plug.
Product Technical Specifications Matrix
| System, Electrical, & Photometric Parameters | IntroGro 42W LED GROW Bar Specification | IntroGro 42W LED BLOOM Bar Specification |
|---|---|---|
| Brand & Core Product Line | IntroGro Infrastructure / Extended Linkable Multi-Phase LED Bar Series | |
| Nominal System Power Consumption | 42 Watts (High-Efficiency Diode Grid) | 42 Watts (High-Efficiency Diode Grid) |
| Electrical Current Load Draw | 0.19 Amps (Low-Amperage Facility Profiling) | 0.19 Amps (Low-Amperage Facility Profiling) |
| Correlated Color Temperature (CCT) | 6500K (Crisp Daylight / High-Blue Target) | 2400K (Warm Sunset / High-Red Target) |
| Color Rendering Index (CRI Value) | 85 CRI (High-Clarity Canopy Assessment) | 96 CRI (Ultra-Fidelity Diagnostic Grade) |
| Total Physical Fixture Length | 95cm (950mm Length Profile / Full Bench Spread) | 95cm (950mm Length Profile / Full Bench Spread) |
| Ingress Protection Competency | IP44 Certified Water-Resistant Shielding | IP44 Certified Water-Resistant Shielding |
| Continuous Diode Operational Lifespan | 50,000 Hours (Zero Performance Decay) | 50,000 Hours (Zero Performance Decay) |
| Included Power Interfacing Hardware | Heavy-Duty 2-Metre Power Lead with Molded Structural Wall Plug | |
| Maximum Series Link Capacity | Daisy-Chain Layouts Up to 500W Max (Approx. 11 Bars) Per Single Circuit | |
| Included Installation Components | Premium Steel Hanging Hooks & Industrial Snap-In Mounting Clips | |
| Commercial Product Warranty Scope | 3 Years Full Commercial Replacement Protection Plan | |
Advanced Multi-Phase Racking & Substrate Control Tips
- Optimizing Hang Heights for Extended 95cm Arrays: Because the 95cm bars deliver an extended linear light footprint, correct vertical hanging heights are key to maximizing canopy penetration. Mount your 6500K Grow Bars 25cm to 35cm directly above early vegetative trays or fresh rooting cuttings. When using the 2400K Bloom Bars as side-lighting or low-canopy supplements, drop the fixtures closer—about 15cm to 25cm from lateral bud sites—to push intense red photons deep into inner nodes without causing heat stress.
- Root-Zone Hydration and Substrate Coordination: Stepping up your lighting footprint from propagation to full-length vegetative bars triggers a massive jump in your plants' transpiration rates and nutrient demands. Support this explosive root metabolism by potting your plants in breathable fabric aeration pots filled with a highly porous 70/30 blend of Coco Coir and Horticultural Perlite. Ensure your wet-dry irrigation cycles stay flawlessly consistent by connecting your drip feeds to a high-pressure Plont PPH Submersible Pump managed by an automated digital shot-timer.
- Calculating Continuous Circuit Loads for Linked Strings: While the linkable feature allows you to seamlessly daisy-chain these 42W fixtures end-to-end, always monitor your total wattage layout. With a 0.19 Amp draw per bar, you can easily run multiple bars together on a single run. Ensure that the combined load of your linked bars stays safely below the 500-Watt limit per circuit (approximately 11 fixtures maximum) to prevent voltage drops and protect your facility's master electrical grid.
- Setting Up Safety Drip Loops in High-Humidity Environments: Because propagation racks and flowering canopies trap high ambient moisture and leaf condensation, electrical cord protection is essential. When routing your 2-metre power lead from the light bars to your power strips, ensure the cord falls into a small, loose loop below the level of the plugs before running upward. This forms a natural "drip loop"—any condensation or water tracking along the cable will pool at the absolute bottom of the bend and drip safely to the floor instead of traveling directly into your electrical terminals.
Ideal For (Uses)
- Full-Length Commercial Propagation Benches: The premier option for large nurseries that need to span extensive cloning trays or seedling benches with perfectly uniform light coverage.
- Multi-Tier Commercial Racking Systems: Perfect for high-density indoor vertical farms looking to maximize square footage by stacking long, ultra-low-profile lights across vertical shelves.
- Supplemental In-Canopy Side Lighting: An excellent choice for mounting horizontally along room walls or between plant rows, pushing intense 2400K red spectrum light directly into shaded lower branches.
| Option |
42 Watt LED Grow Bar - Linkable, 42 Watt LED Bloom Bar - Linkable |
|---|
Oversized Item Delivery Options
Since oversized items require special handling, we may need to provide a custom freight quote for your order and will contact you with an updated shipping rate.
Available options include:
✔ Delivery to your closest depot for pickup - default method
✔ Direct delivery - requires forklift on site
✔ Direct delivery with tailgate lift truck (extra fees apply)
✔ Forklift loading at our warehouse (no extra charge if you arrange your own freight)
✔ Direct truck delivery (available in Victoria)
Important Notes:
- Shipping costs vary by location and method
- Because of the forklift requirement, delivery to the nearest depot is the default option and will be the method used unless you contact us to request otherwise.
Business Delivery:
- Business delivery is available for commercial customers only
- If you select business delivery and your products are bulky, it is your responsibility to ensure you have appropriate equipment (including forklifts) to unload products from the delivery truck
- If you select business delivery and you are not a business, you risk your product not being delivered and may incur additional fees to retrieve your order
- Business delivery customers must provide a valid business address and contact information
- Additional fees may apply for failed delivery attempts due to lack of appropriate unloading equipment
Let us know your preference, and we'll arrange the best solution for you!
Important Note on Availability & Shipping
Our warehouse serves as our office and logistics centre rather than a retail showroom. Because we ship from multiple locations and manage high-turnover stock, not all items are available for immediate pickup.
Lead Times:
- In-Stock Items: Usually ready for dispatch the same day.
- Supplier-Dependent Items: Usually take 2–8 weeks to arrive, depending on supplier availability. Products from Adloheat may take 8–12 weeks to manufacture—they are made to order in Australia by a small business, and longer lead times reflect the care put into quality.
While we strive for fast delivery, some timelines are subject to supplier availability and are beyond our control. We appreciate your patience as we source the best quality gear for your project.
Biosecurity & Interstate Shipping Restrictions
Due to strict state biosecurity regulations, we are unable to ship some products to certain states and territories:
- Potting Mixes cannot be shipped to Western Australia (WA), the Northern Territory (NT), or Tasmania (TAS).
- Seeds cannot be shipped to Western Australia (WA).
Orders placed for these items to restricted states will be cancelled and refunded. It is the customer's responsibility to ensure that the items being ordered can lawfully be delivered to their state or territory.
We Offer the Best Prices
We are committed to offering our customers the best prices possible. If you find the exact same product advertised at a lower price elsewhere, we invite you to contact us and we will review your price match request.
Price Match Conditions:
- The competitor must be an Australian-based seller with a physical presence in Australia
- The product must be the exact same item with a matching SKU or model number
- The product must be in stock and available for purchase at the competitor
- The lower price must be publicly advertised and currently available (not a clearance, closeout, or discontinued item)
- Price matching excludes marketplace platforms including but not limited to Temu and Aliexpress
- Price matching requests must be made before purchase
How to Request a Price Match:
To request a price match, please contact us at sales@greenhousepolytunnels.com.au with a link to the competitor's product listing, or call us on 0418 438 774. Please include the product details and the advertised lower price. We will review your request and respond within 2 business days.
Shop
- Choosing a selection results in a full page refresh.


